Activity Stream

In need of a new pair of shoes/boots so checked them out. Disappointed to find that almost all their substantial shoes/boots have GoreTex in them....

My SprayFine rig came with a small container of a grease. The instructions say to dab a little on the shaft of the needle in the area where it will...

Interesting, learn something everday on SC. From the product's Safety Data Sheet (SDS). 1.1 Product identifier Product Name : Spray Gun Lube...

Congrats Jim! This thread is interesting as it mimics what is happening in Australia to a large degree. After 5 years of falling house prices, and...

Not sure that's an OEM thing, many riders will fit auxiliary red strobe lights, that activate with the brake system. Very common in the Goldwing and...

Upstate NY? It’s not like you wouldn’t be able to get a deal on more wood! My one daughter went to grad school in Ithaca, and my other lived in...

Years ago we had a cat that increasingly preferred to be outdoors full time. We regularly offered for him to come into the house or barn, and he...

Hi Mike, It wouldn't help if you did participate on OWWM, one of the basic rules there is they don't give appraisals. And I don't know what old...

So the makita is now on sale half price, and I ordered one. However, I'm curious as to how...

My 17" Grizzly weighs 70 lbs more than that and does not have solid wheels. Finite Element Analysis can often shave off substantial mass w/o losing...

Where I work we have far more failures of locking than straight blade devices. I find that people don't insert and lock the devices well, straight...

I don't think you can get a much cleaner cut than that. Appreciate your insight on the 600 grit wheel.

I've been using standard 6-30 receptacles. No problems or hassles so far.

I have created a similar 'carousel' tool cart. I started with a heavy base and then added about 50# of sand. Then 3 round shelves build on a...

Having a utility sink will be a very nice addition. I'm envious. Adding a water line and a drain pipe to my shop would entail a LOT (200') of...

Aha! Yes, you are right. Except that I don't think anyone who wants a Centauro or ACM is going for an S45N. :D Erik

Warren, you're now talking out of the wrong hole. You have read the extensive testing David did and posted at Wood Central. For someone who admitted...

Folks: Spring Specials E-brochure + Cliff notes here: https://sawmillcreek.org/showthread.php?290223-FELDER-Spring-Specials-E-brochure Erik

Thanks everyone. Rob the Oneway knocks out the tailstock items by cranking back till it hits inside and pops out. I always drill small first then...

Phillip, Yes, that's the one. Cliff

Interesting to hear the Ego will mulch. According to Roger Cook of This Old House, it is best to not cut too much off a blade of grass at one time....

Yep, that's how I know of glacial acetic acid - from my days long ago doing film photography (and developing the pictures). That really was a long...

https://www.scmgroup.com/en_US/scmwood/products/joinery-machines.c884/band-saws.895/minimax-s-45n.675 :)

For full-width shavings on a #8, I doubt you'll go much above 0.005" shaving thickness, ever. It takes a lot of muscle to pull a 2-5/8" wide shaving...

Just a few.