Excited about this new forum. I have found where I live that repeat customers are huge. I am a carpenter with my own business for the last 25 years....
Very nice Wixification, what a time saver on set ups that must be. I had Wixified my General 130 a couple years ago, never thought of doing the same...
Do you intend to actually cut directly on the surface? If not, the coating is an advantage. I never cut directly on the top of our island...I use an...
Naptha and mineral spirits removes cooking grease and it won't swell MDF. Wipe them several times with a new rag each time to be sure all the grease...
Just about any appliance you can think of is available with WiFi/BT these days...I mean, you can watch the SuperBowl on your fridge while you make a...
Nothing wrong with an overhang around all four sides as long as it doesn't interfere with your reach to the center of the cut. I'd give myself about...
I'm not really worried about it...I mostly cross-cut and I can do that on my MFT if necessary. A lot of the things I do these days are on the CNC, so...
Hi Julie,
i understand completely! I’ve replaced my major stationary tools over the last two years after decades of budget tools. Table saw, bandsaw...
All of the techniques described in this thread work, but it's worth mentioning that this is often more of an issue with new planes that people try to...
Dropped 4K in 2006 for the SS ICS 5hp. All through the Lawyer and IP argument riots of the late 2000s and early 2010s I have used that beauty and its...
