Activity Stream

Agree, very versatile with all the different bearings. And finger joints are fantastic for joining shorter boards end to end for curved trim such as...

So I can officially say that I've scraped together enough of the scrap to create the whole Scrap Vanity and no more scrap scraping is required. It's...

EM8000cv is the top coat. It's even more durable than the EM6000. The cross linker primarily provides increased chemical resistance to the Target...

Where are you located? When I started fooling with these things, an afternoon in a shop with a guy who knew what he was doing taught me more than I...

One of mine that gets a lot of use is a very rustic wedge maker. I made it 20 + years ago when I was out of shims and late for work. It keeps...

Another staircase design for when the available space is too tight for regular ones, is "Dancing Stairs". I have a very old book that tells in...

Great, thanks for confirming, really appreciate the help!!

I find Yelp reviews for local businesses good. I recently needed an exhaust repair on my car. I looked at Yelp reviews and picked a shop based on...

Follow up. How does it work buying from Whiehill and shipping to the US. Shipping and exchange rate. Do just let the CC company handle it. They...

Haha, great pun Prashun…….Regards, Rod

As always an inspiration. jtk

You will want to replace the 4 prong receptacle with a 3 prong receptacle that matches the plug on your machine. You will use the two hot leads and...

Here's a list of questions right back at you. 1. What is your budget? 2. Do you want this to be your last lathe, or just a start and an upgrade is...

Put a WTB on some of the various forums, maybe on some of the other online places that have marketplaces on it. A jointer is one of the few tools...

I agree. I do the same as Alan and Ronald suggest.

And for clarification if the photo doesn't compute... I'm making an alternating tread staircase. The options were: a full staircase - with the...

Will do when done! Might be a while, unfortunately. Here's a "boring" picture of how I kept the treads from touching: Two screws on the wider...

Sounds good. I hope you can post pictures.

What about ways on a slider?

yeah I've not had any luck finding a used one either -- either basically MSRP, junk, or non-existent.

The Buck Rogers eggbeater drill, #104, was made from 1915 until 1935. Its bigger brother, #308, has an odd situation. Oldtoolhaven.com says it...

I'm curious, do you always topcoat the EM6500? I added the cross linker directly to the 6500 and haven't had any issues with durability ... at...

Thanks everyone, this is super helpful! The machine was working properly with the dryer plug and consensus here is that it's wired fine other than...