Activity Stream

I have four of the basic units. When I got them I don't think the larger industrial model was available. Two are over my widebelt sanding area, one...

keep the improvement thoughts coming. Isolation between concrete and metal is a good thing. Personally I cant stand the look of moveable bases...

Hi Fred, A picture would really help to see what you are doing. It took me a few readings to visualize a tail in the center of the joint with two...

Thanks, Brad! David

I'll PM you!

I was just browsing the cherry at Irion lumber in PA and they probably have what you need. Sounds like a fun project.

How high do the numbers have to be to cause you concern? What's the threshold for putting on a respirator?

I have 1.75 now and it is plenty for me. Do you get better features by going to 3hp?

Taking a cue from a youtube video on the A3-41, I'm trying the Rockler schedule 40 to 4" adapter and their quick fit adapter stacked on each other -...

Can anybody measure the table post size of any Grizzly or Shop Fox floor drill press? The Harbor Freight 13" and 17" both have the approx. 1.85"...

I have one somewhere. If I run across it, I'll send it to you. I don't anticipate ever having a use for a folding one. PM me your address. No...

I don't have much to add information wise, but I also have the 1100 pro, and I am very happy with it. It was quite surprising just how much...

Not trying to get personal if you were directing that towards me, or was it Erik for his comments? Thought I was discussing and asking a question...

Assuming you mean honeycomb grids and not a slat bed, LightObject has a 300x500 (12" x 20") and McMaster has aluminum honeycomb in a few shapes. They...

A Newfie pilot and copilot had to fly from the Rock to the center of the universe (translation for my American friends, Newfie= someone from...

Did you read the description? It's says 900 lbs and then lower down it says 1200 lb capacity, lol. Either way it's more than enough. The problem...

Anyone think alcohol might work better than water?

Jumped off the cliff into this myself a few months back.A whole lot of info(you have to decide which is good or bad) on Youtube. Alumilite and...

Wow! I was thinking of going up from my Rockler 4" quick connect set up to the Magport, but at $160 to hook up my machines!... Any discount codes??

For a monkey wrench, I'd be tempted to use Monkey Pod (that's a joke).:) Any wood would work. I'd look in my scrap pile and choose some. Mike

Jewish mother The year is 2028 and the United States has elected the first woman as well as the first Jewish president, Susan Goldstein. She calls...

Since you can work with metal I would just work with what Grizzly sold you and modify it. By that I mean removing the jointer from the base so you...

Dye only penetrates a few mils - as in thousandths of an inch. Put some on a piece of scrap then cut it in two after it dries and take a look. All...

I'm spraying some Emerald Urethane right now for a dining room table base. Thinned 10% with water it sprays incredibly well and flows out to a...

If it really bothers you, just route a v-groove across the top drawer fronts, put two knobs on it, and PRETEND it is a toothbrush drawer.