I like the tight setting, but I find it can be hard to insert/remove the dominos for test fit. I usually sand the edges of the dominos a little bit....
I have a small 5 gallon unit that I drain and leave the drain valve open when the unit is not needed, I don't use it every day but when I do and blow...
I supply an angle gage with the Universal Shooting Board, to make it easy to set the pivot stop or bevel angle to 22.5 or 45 degrees. For 30 degrees...
For what I do I only use a screw to mount small to medium sized pieces to turn the bottoms (face rings for larger pieces) then use chuck jaws to hold...
The reason I try to remember to shut off my compressor when leaving the shop is because of a bad experience I had several years ago. While I was out...