Activity Stream

I had a tablet that I wasn't using and I bought a wireless endoscope for something like $20 on Ebay. It works like a charm. Rusty, take a look on...

While my shop is substantially larger than yours, it is not strictly my workshop. I have my GuideBoat in there this winter and the Precor Elliptical...

Thanks, Jim. I won't pretend to completely understand the specifics of the Supercell. I've just taken their word for it. Though I have wondered...

Poplar from the big box stores is fine (it's in the trim aisle), but will be a lot more expensive than buying it from a hardwood lumber supplier....

That was my thought if the service in the house is adequate to support a subpanel.

My shop is 16x24. I recently added the four foot bump out. I have a 32 “cabinet saw with two foot outfeed. I add a Bora centipede for more outfeed...

I went with the Ryobi 40 volt because I had the string trimmer. I've been quite happy with it. Surprising battery life and power. The nice thing is...

Jack, that is sage advice for sure.

Thank you for that compliment, Joe. Having done this for so many years, the challenge has always been the same no matter whether it was Italian or...

I use QuickBooks for my business and it produces professional looking estimates/quotes natively. I use clear descriptions and include any special...

Probably 25 yrs ago I was seated on a flight from NO-Boston, next to a gentleman who for the first 1/2 hr of the flight was hammering away on his...

The most I round over is 1/8", and if I have something that begs for a bit of hand-made look, I put on a teeny (less than 1/16") chamfer with a...

I recommend to anyone space limited to consider a Jointer/Planer combo. I have a 12" Jet JJP-12 that fits in a space 2' X 5'. That gets me a 12"...

I lean the other way. I prefer crisp edges. Generally I hit all edges with two passes of a 180 grit sanding block at the end of sanding, and that's...

Julie, keep in mind that the SuperCell is designed to be able to support higher static pressure so it's more versatile....it can be used successfully...

I’m confused, it isn’t hard. I understand you will be able to see the finish on the inside but how is that going to tell you the thickness?

While I don't have a laser at this time I follow the laser forum because I may get one one in the future so I read the threads to learn. What happens...

I'll admit I was pretty shocked to hear the Supercell could collapse that pipe. On the other hand, the sales rep was thinking borg HVAC pipe is 30...

Reading some other threads it appears that Quickbooks would be a good fit for us. What about the specifics on the quote?

BORG has also been said to come from: Big Old Retail Giant FWIW, I built the cabinets for our new kitchen six years ago. Given the amount of work...

The largest convention is to make ceilings white because of how it distributes light. There's no rule that says you cannot do something different,...

It's best to just use straight text editing with a default font. But as Lee mentioned, you'll likely need to edit the formatting once you copy/paste...

My endoscope that I purchased ~ 2016 was serviceable but relatively low quality image. The one I purchased in 2018 was much better resolution and...

I've seen tires degrade from dry-rot, etc., but it was mostly on trailer tires. It's pretty much a "rule" that one replaces them on horse trailers...

Thank you, Jon! Erik

I could write an entire book about this topic. You go into shops (both big and small) and see why some some are actually prospering while others seem...

I’m surprised. I would have guessed the majority of the responses would have said most rip w/o any accessories. At our woodworking clubs and other...

That would be great, I think I'd like to give them a try. Thanks John! Actually I just googled you/it and found a 14 page .pdf from 2018!

I would most likely use a hybrid approach for cost control. I already use the Nordfab type quick connects for some of my drops (CNC, router table,...

For all you safety-minded folks out there.