Activity Stream

Super nice but too expensive for me.

I forgot to say the misalignment doesn't make much difference on long spindles but can cause problems with smaller, precision work where the...

Frankly, unless there is a physical reason why you can replace the valve completely with a new one, I wouldn't trust the glue not to give out without...

I took the liberty to rotate the photo. The first thing I try when points are not aligned is adjust the leveler of (or shim) one leg of the stand....

On a Toyota pickup a long time ago: ATOY -when read in your rear view reads YOTA

Welcome to woodworking and the forum! This is the most modern book on safe shaper work right now in my opinion: https://amzn.to/2R7mqkU It's a...

All I can say it that it reads 0.00 for PM 2.5 when the government says its 34 right now in my area. It always reads 0.00 for PM 2.5. Anyone can...

Highland Hardware has the Rikon 8" slow speed grinder on sale, I don't know for how much longer. The Oneway Wolverine Jig with the Varigrind is...

That should be plenty - I started with a 1/2 bowl gouge and a thin parting tool, then a few months later added 1/2 and 1 1/4 skews then a year later...

Go to Amazon and search for books on shapers. There is an excellent book on shaper use and safety tips. I think the author is Lonnie Bird.

I didn't read through all of the posts so this may have been covered...but when purchasing a saw that claims a certain HP rating, you need to...

Steven, The build of storage projects you have done and posted, especially the chest of drawers type tool cabinet, have definitely given me ideas....

Band it in wood...you can create a very nice molding that has the roundover/bullnose that you want and it will also hide the edge of the laminate on...

Second thanks to Sean! https://www.clearvuecyclones.com/pvc-ducting-accessories/107-6-flex-hose-apdapter.html

That is what I needed to hear, thank you.

Yea...I'm sure working in socks and hoping you don't drop one of those razor-sharp chisels comes to mind, too. :) :D

I went with the Rikon 8" slow speed grinder on a Harbor Freight cast iron stand. Added Veritas guides. After I wear down the Rikon grinding wheels...

Parting tool.

No real dirty work, plus the sanding, I have done, is all done using Festool sanders connected to a Festool CT26, there is usually no sign that...

I put a riser block on a HF bandsaw that was given to me. It was one of the newer ones so there wasn't a block mad specifically for it. It actually...

Looks great! Overhead dust collection for the table saw is on my list but I am planning to build something that pivots out of the way when I am...

Yes, I believe that’s the one you want. The small particles go much deeper in your pulmonary tree and are more harmful. Those are the ones you want...

I ordered a couple handles.

I sometimes use a spare table saw to cut dados - to avoid switching back and forth. I have a really junk direct drive Ryobi I've used for this and...