Activity Stream

Kind of situational though. I have enough space to run a full sheet of ply through my cabinet saw but use a track saw with a cut table in a different...

Why is it not possible to straddle the cutterhead? When possible I run moldings with an inboard fence starting with a wide board, ripping to...

I tried walnut shell on a burl- gave a fine finish but very slow. Best would be to find a blasting shop to do some samples with various media....

It's most likely going to be a bust. Even if everything happens just right the meteors are expected to be moving very slowly. This means they...

I’ve used a hair dryer . Beware of Damaging the sheen.

This goes along with what I think many people miss; if you're breaking sheet goods with a cabinet saw it's essentially the same working area when you...

The best method I've found is to use a linen towel and a home iron. Set the iron on the cotton setting fold the cloth so there are two layers. ...

Erik, I totally know what you mean about making room if a slider showed up one day. If I got convinced that a slider will be in my shop for decades...

Hi Derek, Thanks for replying… That is simply beautiful! Pete

Sounds like a fuel issue to me. Might want to check the fuel filter. In my saws it's inside the tank and doubles as a weight to get the fuel hose...

5 meters tall by 9 meters wide! That's big. (over 16 feet tall by 30 feet wide). Are you thinking you'll cover the whole wall with shelving? ...

Pete, I believe that the idea was that you make these yourself. No one I know sells them. This is mine. Great for lay out. I modified one...

I have a Stihl chainsaw and it works fine. If not run in awhile, it is grumpy. I have arthritis in my shoulder and starting it aggravates it. I...

I too have Make 2017, on Windows 10. I use it quite a bit. I just started it up, and didn't get any complaints. Where do you think your message...

Any time I've had the "starts but then dies when the trigger is pulled" issue with my MS290, it's been because i, um...tighten the chain up too much...

Joe — you are not that far from Hearne Hardwoods in PA. Arguably one of the best lumber suppliers in the mid-Atlantic region. Highly recommend...

I watched a portion of the video linked by Randy, at about 51m, and he confirms that drift like the OP saw happening, occurs only when the back of...

What is the objective? Sorry, not familiar with "salve" in discussion of bowl finishes.

Thanks for the help guys.

Thanks Rod, interesting to note for geographical reasons, seems Quebec has rather clammy summers compared to Ireland. I've hopefully no need to...

That sounds like more of a problem than the spark arrester screen. One good thing about cordless chainsaws is that they are easy to start.

Take it to the dealer and make then show you it starts easily multiple times.

Sale pending.