Activity Stream

Thanks Jim. The cantilever gets me 15" above the table. Right now the only thing I can think of that may have a problem with a fixed arm is my...

In our area (NE Ohio), if you change your water heater or furnace you will have to have the chimney lined, period (unless you DIY and don't pull a...

Yes, "this is the way". I would not recommend using the MBF for a dado stack. It'll spin it, but it's a little 3/4HP motor. I use my MBF's for...

My plan is to "set it and forget it" for both of them. The big Delta has a 12" blade on it now, and will be set at 90°, more or less permanently. ...

When people build fences on easements with a zoning permit they will be informed that the fence will be dismantled and not reconstructed if a utility...

What are the specifications for the product you used at the depth of your pour? I'd be concerned about having "tacky areas", however, and that would...

Thanks for all the info and suggestions. This Forum is amazing!!!

If the weather stripping is new it will be hard to close for awhile. If it’s just a nice tight installation where the bolt won’t drop into the strike...

Bryan...CFM ratings. Not something to rely upon on mass market machines and their advertising. They will never come even close to that level of...

Years ago I saw lots of #8 planes at a great price so I bought one. It was a dream to use. I thought nothing of giving it to a friend who was...

This guy is pretty clever you might want to check it out for ideas.

The red tile flue liners are fine for more traditional, lower efficiency burning appliances, but many mid-efficiency devices require stainless steel...

All the guys buying SawStops have to do something with their old ones. :rolleyes:

Lets Talk about FEDEX LOL I ordered a pair of pants from Wrangler in Edmond OK . It 913 miles from there to here or 13 hr drive. Its been 11 days in...

May try a couple planks later today... Might start a "Build-along" thread about it. Might even USE the newest Combo plane to help it along. ...

So - on top of what other's said about vibration, fence or blade alignment issues, one issue I had on a jobsite saw was the actual table. It was...

this stuff? looks interesting. http://www.conservationtechnology.com/building_weatherseals_components.html

The existing, quickly made surfaces are just skins of .5" plywood with scrap solid wood to make up the internals. For your idea, you don't need to...

Happen to have both a Sargent No. 408 VBM and a Sargent No. 414c,VBM.......use both just the same as the Stanleys and the Millers Falls...

Flue liners is that the proper name for those red or orange colored blocks that stack?? What are they made from?? I am saying steel liners, they I...

I'm a bit of a contrarian these days, I've been using T5HO fixtures and lamps. The lumens/watt (and therefore energy cost) are very similar to what...

That's a really nice setup, Fred!! I do agree that a method for swinging the overhead guard/collector away or easy removal/reinstallation is...

Whether you use Plexiglass or Lexan or real glass, it's not a bad idea to do as you say to dampen things for rattle. It could be the adhesive as you...

Flue liners. I've never heard of steel liners being required in a properly built chimney with flue liners.

I got as far as a full mockup yesterday. First, the upper arm must be moved back one joist so things line up. Second, that arm too wobbly which I...

I just became even more aware of this in the past few days. I recently purchased an inexpensive particle sensor for my shop just for grins. A project...

Quick follow up question - when you install the plexi pane in the frame, what are you guys using to keep the pane from rattling when the door closes?...