I am about to try brazing a Schroder valve stem into the side of an aerosol can again. I had one for WD-40 years ago. Air pressure was provided by a...
I mean, if you're buying dimensional lumber to cut down to ~1/2" for drawers, can't you just resaw it down to 3/4-7/8", then sticker it, and mill it...
Two snips from the Lowes website showing yellow pine boards. One is better suited for drawer sides than the other. S4S = moisture could be as high as...
Since the tooling would be passed along to the installer/contractor to fit and adhere the wood parquets to the concrete pavers on site; i made a set...