Activity Stream

Great sanders - have used them for many years, and went through several. There is a small disc in between motor housing and pad that is supposed to...

Here's an option for a used CAMaster Stinger I SR-23 that's not far from you. It says 2x4 but he states it is a typo and is a 2x3. If it's still...

I bought a Shop Fox in 2020 8" Jointer with Adjustable Beds and Helical Cutterhead at Grizzly.com from someone else on line, strictly lowest price....

I can recommend the CMT rabbiting set. I've had one for several years.

Very nice. I made ours back in the pre-flat screen TV days. It is 22” deep. I envision some one either cutting it down some day or discarding it as...

Still nothing. I did notice that when the Laser is running or should be firing that if I turn off the power button ezcad2 gives an error message but...

What is the barrier to going with mini full mortise lock sets? Is it the latch mortise? Seems like the right result. Not sure about the process....

I'd go used with either a Delta or Powermatic made in the USA (Delta made in Brazil also OK).

I almost always go to the 1 or 2 star reviews first also. You can quickly tell if they are unpleasable or have a legitimate beef. Most are legit and...

Hello sorry to bother you but I’d like to know your opinion on grinding stones for sharpening turning tools. Because I’m not sure about the grid...

Consumer Reports isn't what they used to be but you can't question their honesty. Unfortunately they are increasingly geared toward the...

Other places like Acme Tool have it for $300 less than Amazon with free shipping and show in stock. Just an FYI. ...

If you have watched the TV show "Flea Market Flip" or "From trash to treasure", you can see all sorts of stuff "upcycled" into a piece of furniture...

It is fixed. I deleted the shortcut I was using to go to SMC and created a new shortcut. Just tried it three times and it worked as expected each...

That's what I do. For the port that sharpens on the bottom of the disk, the position of the abrasive is not changed by using a diamond plate. But...

Ditto what Kev said and I think he already told you to unplug and re-plug all the connections. Some Chinese venders sell counterfeit Ezcad boards ...

Unfortunately, companies that manufacturer power cords do not follow US color coding standards like they should. I have seen all sorts of color...

No joy. I have cleared all cookies, Chrome cookies specific to SMC, rebooted and hard booted. Still have to log in twice with the first attempt...

I don't have that model. Sanders typically have a rubber "brake" that rubs on the pad. Slows pad down when it is off the workpiece so it does not...

Aaron: Ever get back to this after your injury? If so, I'd love to see some pictures of it. I like the design so much, I'm seriously thinking...

Never seen one on a house in California but I hear back east lightening rods are no longer used on houses. Theory of a lightening rod is it draws...

Used will be a lot less and available. A uhaul 5x9 trailer rents for $26 a day with tax and insurance. The 3x7 is a little cheaper and lower...

A house wire from 1949 is very hard to discern white from black wire. No ground to worry about. My current house 1969 very easy to judge wire...

I would get the one that's at least 12" wide. Seriously. I started with a 10" J/P and now have a 14" but still often wish for wider. Everything...

If the original electrician had done his job he would have used a green sharpie or green heatshrink tubing and marked that white wire.There is a...

Since the start of the industrial revolution, and even before, that line of who did what and when has been a major issue. Light bulb, telephone, etc...