Activity Stream

Derek, You convinced me. Order placed. Thanks, Gary

The Long Ranger brand remote selected for the voltage of your DC. Very easy to control.

It was more than I expected.

As someone who is looking to replace my current DP with a new one in the next 12 months I've looked at both (but not in person since nobody around me...

My wife has one of these in the kitchen. I'm considering one for the shop. Rolls easily and has a vast range of adjustment. ...

I was thinking the same thing that it might be veneered.

How would you do a rip, Tom?

Honestly that looks pretty good to me. Are you sure the other pieces of furniture are real breadboard ends and not veneered MDF or whatever?

Oven cleaner is lye. Basic or caustic opposite, of acid. It will react with anything organic and aluminum. Concrete and marble should be okay with...

Definitely no ATC. It can be added as upgrade for $14,000 though. The machine model is AXYZ 4010 and as stated in OP low hours ~600 Its been...

I assume plexglass is very high priced right now. Bill D

Find a bearing supply house in your area, if you bring them the bearing they will measure it and provide you with the correct bearings. This is a...

And here's another photo showing some carved and others not carved and the color resin that still needs to be turned down flush to the spheres...

Larry Frank, I didn't mention the power because there was no loss of power. In one of my first posts on the subject I mentioned I used a 3" and...

That’s about what I’d paid for mine minus accessories about 5 years ago. Great saw, if I had the space I just would’ve gotten the longer version. No...

I am 99% sure this is Victorian - my grandmother collected Victorian furniture and I've seen this before but I cannot verify the assessment for sure....

I have not heard of any of the other three. TradeWinds looks - expensive - but who knows? Very intriguing to find that kind of stock here in VT. ...

If you prefer, send pictures to Ltsuth@outlook.com. Thanks

The piece was built like an open air segmented piece kicked up a notch, I never use math programs in any of my designs it's all done by eye. the V's...

Would you please send me a picture of the ground flute. What size drill? Thanks.

I spent days trying to log into your site. The robo preventer is a pain to deal with and because you only get 5 tries to get it right, I forgot about...

So it finally arrived and after replacing the rubber feet (They were pretty worn down) and getting it vacuumed (the previous owner left quite a mess...

Great! This looks perfect. Thanks for your help.

It looks (to me) interesting but not comfortable.

We have several HDPE adirondack chairs. Far superior to wood for yard use, IMO (unless in the sun). No adhesives on these, just stainless fasteners....