Activity Stream

Be careful how you handle this situation, I lost a friend with an almost identical dispute, surveys, deeds, attorneys the complete ordeal. The...

I see no harm to the 6" drop to the table saw/overarm location and the 6/4/3 split. (You will likely need to use a 6/4/3 wye and adapt the hose for...

Great news on the benches! Glad they liked them, not that I’m surprised. We have been building these 9’ tall gates for a historic property...

Mike, I don't want to discourage whatever deal you and Lowell may make, but if you want a response from the OP you probably should send a PM as he...

Thanks Jim. That works for ipe. I was hoping to find prices on some of the softwoods, particularly the ponderosa pine.

Still looking for a 3HP or so motor.

I have planes and other items in open top shallow boxes hanging on french cleats behind my work bench. Most are single tail boxes much like what you...

John is correct...there is more than one version of the product. Rubberwood is very popular for mass market furniture like that that is made in...

Many of the better brands have been listed, and I agree with Dave that the VicMarc, OneWay and Robust are top tier, but I believe there may be varied...

I can't remember exactly, all my machines were setup to use the Rockler quick connects, before the Magports. I think I bought the Magports in a...

I'll take the 140 Left please, if you are willing to ship to Madison, WI on my dime.

I think I'd put up at least a simple fence to delineate that area of your property that's on the other side of the creek, as it were. A lot of folks...

In NY the adverse possession law was done away with ten years or so ago, or that was what I heard at the time. I'm not a lawyer so I don't really...

One additional point...there is a physical limit to the number of images within a single post beyond the 8 that cane be attached...and "smilies"...

Same setup here. Are you using a 1/2" blade or a 3/4" blade? I don't know if the 14" Delta w/ riser can handle a 3/4" blade.

That's really nice, Brian! I'm sure the family felines will appreciate it. :)

On the weed tangent, pre-emergent products that discourage or prevent germination have to be part of the maintenance plan. That will reduce the...

One slight word of caution when using the Fernco fitting - there's precious little clearance, if any, between it and the wood passing under it when...

My Freud SD608 dial-a-width dado comes in a very protective plastic box. One of the best dado sets around. Can't imagine the blades getting damaged...

I thought there was something like that! I'd go for that for an old work box being mounted at a stud location!

Josh -- WRT your last question, use your Bosch Dust Extractor for your smaller tools. A shop vacuum, like your Bosch, uses suction, not air flow, to...

Shapeoko Pro gets you linear rails, although they are still using the belts for positioning. HDZ Z axis upgrade gets you a ball screw there where it...

They make boxes that are combination old/new work that screw into studs... just like pocket screws. NEC allows interior fasteners as long as the...

Often adverse possession requires that he can show that the original owner knew of the trespass but did nothing. That is why you need to formally...

I guess the information I read was incorrect, Kev. At least you can easily transfer that money out lickety-split into your regular checking account....

Hi, Michael, I am enjoying the site. I wish I had hours to simply read through. Such an education. Well, I agree. I don't see how anyone could get...

They are pretty good, and for resawing are about as good as you can get for smaller saws that can't use carbide blades. They have a thinner kerf...

I got the extended bed on my Robust, it will do 52" between centers. Can't even imagine being happier with a lathe. Big bucks yes, but that pain is...

I imagine there are other blades that are as good, but I've come to rely on the wood slicers for critical cuts. I always keep a newish one around for...