Activity Stream

Maybe I got it backwards, but they used to combine the functions of the neutral and ground in one wire. Someone in the past had installed a four...

Powermatic got my vote. My 6" is great.

Your general area could be helpful. We might be able to steer you towards something that isn't listed etc. For example I found a 16" Grizzly when I...

I would buy a used 12” + jointer and go HSS or Tersa style if the machine already had it. Have you ever used a jointer with a helical cutterhead?...

To your point, no sissy commercial stair components are to be used. I have a big ole pile of rough-sawn, air-dried white oak that expected to spent...

If it is the power supply would the fans sound normal on the max laser component? They do sound like they always did when I push the red button that...

I just realize something. The spiral inserts heads are the 21 century Ginzu knife of the 80s. Instead of as seen on TV it’s i saw it on YouTube

thats odd as I buy machines from italy, Austria, US, England and others and im in canada. Its the best bang for the buck but then im old...

+1 on the 180. It's the sweet spot as far as the best for sharpening and shaping.

Check this site: ...

I wouldn't be surprised if it was built in the same factory as the bora and powertech...

Glad to see an offering in this segment. But, I think their designers fell asleep at the wheel, if there were any designers. It's got looks only...

A CNB wheel may not be the cheapest deal you can get, but it is the best value, as in you get far more for the money. They are spin and bubble...

Might be a viable option if he lives in Canada, otherwise ....................................:( and it ain't likely to have a spiral cutter...

I still think that it may be the base power supply, not the source. At least from my experience, when my source died, JPT 50w, it would NOT...

Anyone tried Dupont Chain Saver for lubricating the raise and lower mechanism as well as the tilt mechanism on a table saw?

It was only permitted to ground the frame of cooking appliances & clothes dryers to the neutral, up to when the 1996 NEC was adopted, now it is...

I have a Cadex 23 ga that shoots up to 1 3/8” and even that can be pushing it in really hard woods, though I have done it (oak, ash, etc) There...

It's about both. Wedging a tenon isn't a well described topic in literature and often produces unexpected results. But answers first. I think you...

I often go right to the 1 star reviews too, but if I bought stuff only based on the 1 star reviews I would hardly ever buy anything.

I really don't want to steal Aaron's thread, but I'm definitely going ahead and building one of these. A number of modifications, of course, but I'm...

Just don't overdo the number of coats f shellac you plan to end up with. Shellac doesn't need or even like, too many coats.

I use stainless ones to sew ridge wooden shingles on along with construction adhesive on one underside. I shoot a bunch of them in at different...

I feel sorry for folks trying to get into the craft or upgrading their shops right now. I have often seen the current asking price on products I...

I just had to make 90 - 15.75" X 8.75" birch 1/4" ply panels. I made up a parallel guide 8.5 inches long and used it to set the Makita track saw...

Did anyone mention using a support strap on the outside of the laminations to prevent them from breaking going around the form? That's pretty common...

The rational for basting end grain with watered down glue is to stop the glue at some point from just being sucked into the end grain. This is not...

2" is probably suitable for very soft materials. Might have trouble shooting through or straight in harder woods.