Activity Stream

I have the TSO connectors also. They no longer run $10 to $20 though - they are now $59. That's up from the $55 I paid for mine last September.

We have front, side and back porches. I got tired of refinishing them every few years and had them replaced with Trex. Wash them off each spring and...

Jim, without even comparing which head unit is better (and they appear similar in many ways), the PCCM is three times the price of the Alpine. I...

Thanks Greg The Alpine ilx-507a is a very up-to-date head unit - I needed to be sure that the technology will be around for several years. Of...

Thanks Jim I have been on the Crutchfield website several times. They have great reviews and information, plus specific guidelines for equipment...

I don't know about the phoenix analogy, but I'll tell you this: being able to go into the shop, pick up the Bontz saw and get to work after 2 1/2...

Actually my wife came up with a great idea. I built a 2x4 wall the length of the shop to keep dust, etc from the house mechanicals, and she suggested...

This is copied directly from the Chevrolet Protection Plan details. A used vehicle can have it added to it after the purchase date. It's not even...

Hi Robert, While i appreciate the fact you have a nice saw (with a nice fence) with your contractors saw, if you were thinking of an upgrade i'd...

Thanks for checking in Richard. Two weeks and you're still missing the point of this thread. The point was to get an idea of how fellow woodworkers...

Two hour round trip to Lowes and one and a half to Home Depot. Amazon is easier.

The drawknife has been sold.

The Bedrock No. 605 has been sold.

Yankee #2 has been sold.

Were you aware that square extrusions are available for the unifence ? You can get a new viewer window and adjust / replace the locking hardware...

Alright. I think I'm getting air entrapment and my paint is just a bit thick. Unfortunately I'm just adding water for experimentation without...

The Phoenix rises! Mortises are excavated and the tenon saw sings...Bill is living big in his small shop! Keep us posted.

Years ago, I ordered some R-404a Freon ( 30# cylinder.) Shipping was less than $20, but haz mat charge was over $50. Used to get R-22 thu local...

Thanks for all the info. going to have to really think about how i want thing laid out.

Every week, I use a bunch of Blue Bonnet stick margarine making biscuits (2 1/4 sticks.) Last year was paying $1.69 for two pound box ( 8 sticks,)...

my post not showing when im logged on same as past many times. ill ad with the router I can climb stuff that would not be safe on a shaper. the...

Lowes has a section with garage door parts including the quiet rollers. At least you can handle them there.

Derek, Not sure if you have considered Porsche's PCCM Plus (support for CarPlay) for your 986. I have a 981 Cayman and am awaiting the arrival of...

And that difficult. If the edges are off only by a degree or two the frame won't be flat. If the mortises aren't cut perfectly parallel with the...

I use whatever does the work. Shapers cant do tight inside radius work.

I now do almost all template work on my shaper. The power and smoothness is worth the time to put together a jig to hold work solidly. I would build...

Been a long time since I dabbled in car audio but if you can find any of the Arc Audio KS 125.2 or 125.4 amplifiers still available, they are...

have you looked at how they are adjusted. Some have an adjustment mechanism that twists to change cutter thickness others are two halves with shims...

Personally I would wait and upgrade to a real cabinet saw down the road. That saw may be better in some ways but it is not really that big of a step...