Activity Stream

You could fabricate one out of a 4" air duct like this: It is available from the Orange Borg and the rectangular portion measure 4" x 10"

Very spiffy. Thanks, guys!

This is the one I used on my Grizzly jointer. https://www.amazon.com/dp/B005VRH2X0?ref=ppx_yo2ov_dt_b_product_details&th=1 As mentioned above, you...

Here is what Henry Disston said about quality back 175 years ago:

Surface grinder on a magnetic chuck. BilL D.

Plywood with a 4" hole. Put the hole so it is just above the bottom of the chute. On mine I glued on a 45 degree coupler aimed down to hook the...

I have a Domino XL and never use the loose setting and get tight accurate joints. I could see using the loose setting on some mortises if using it...

I have the 6” Hamilton knife gauge and it is a favorite tool. I would highly recommend it.

Conventional airliners (including civilian freighters) are typically pressurised to 8 psi. Which yields a cabin altitude of around 8,000’. I spend...

I do have a 36" cabinet saw but it's sometimes a pain to cut longer things in - for example I have some 6 foot 12" wide panels I need to cut to about...

Quite possibly the funniest thing I've read on SMC. And that's saying something.

I think they are in a hidden drawer and I'm pretty sure where that is hid. :D jtk

I did a bunch of research in the last year on miter saws. I previously had a big Dewalt 12" sliding-compound miter saw. This was huge and extremely...

All items sold. Thank you.

Like woodworking tools, garden tools also get dull with use. Especially if the clippers have been used for years and years without the benefit of...

Have someone dip the shutters in a paint remover tank. Quicker and easier for you anyway.

I finally found the Hudson trombone sprayer. ..At first I thought you were pulling my leg..:rolleyes: Unfortunately there is a note that it is...

Stefano, that will sure be an interesting look. May I ask, do you own the apartment in which you plan to install this ceiling? If not, do you have...

"I like 60t, as most radials are somewhat less HP than table saws and higher tooth counts seem to need more power, especially in thick stuff." ...

I used the silicone covers on my previous apple watch 3 and it was great. It withstood all sorts of abuse and when it became too foggy and stained,...