I'm aware of only three car washes within a 10 mile radius of my house and none being built. Not aware of any associated with gas stations, and none...
I use these and the cool part is you can use your Domino and 4mm bit to create the pockets. And even better news is that if you don't have a Domino,...
Thanks all for the suggestions. I tried Ken’s wedge method first and that got the CNN wheel off. The flange is still stuck I'll try penetrating oil....
The temperature of the glue and material at that time was probably in the low 40's. I had been using another yellow glue tolerant of low temperatures...
Harold, I don’t think the headstock comes off. The manual is silent on this point but clearly describes an assembly process in which the headstock is...
How you tell they are backed out from that angle is beyond me. You really think he backed them out after showing the curls? The only showed a tapered...
Thanks for all the tips. It's funny how this thread helped me sort things out. I immediately did some research online and yes I'm going to try traps,...