Activity Stream

It sounds like you mean driving it in square without first turning a tenon on the 1x1 basswood. If so, how well it would hold would depend a lot on...

With a bit if time to stew on it, the one thing I am least likely to do is take this bench apart to replace the vise leg. I just don't want to put...

If you walk into a bar wearing pajamas, people will buy you drinks.

Used 3D printers for maybe 5-6 years. The last one is a Prusa 1/2 at the price of the US made ones I had and very good. Never print anything in PLA...

Very nice! Tim

Or the last one you want SWMBO to find out about. :eek: jtk

2 sensors will be the typical setup especially since the dust loading to collector is not always the same. For example 60s of tablesaw dust is...

Looks good!

Very clever design. I may have “borrow” it, too. Thank you for sharing your work.

I like it, especially the continuous grain on the drawer fronts.

Thanks Bob. The idea about the position of the screw holes in relation to the dog holes is an interesting idea. Much appreciated.

I would not run climb cut with the real profile cutter. But a climb cut made on the still square stock that rounds the corners ,and more if...

You are correct. Thin passes on the planer and final planing with a hand plane. Sometimes belt sander with figured mahogany that I work with a lot....

Thanks David. That is what I had been thinking too. The screws ought to apply enough clamping force.

Thanks Jim. I don't know what search term would have raised that up but I'll continue to do my best to locate it. I suspect you are right about the...

And a closer view of the back side of the vise leg with the side stretcher coming in from above. I don't like it.

If you do a lot of HD streaming you'll find that 3Mbs down is pretty slow. Multiply that by multiple TVs and it is really an issue. Working...

The two pictures I posted of the vise leg yesterday were taken yesterday. I looked at a few pics from Jan 2019 in my phone, edited them to upload...

I am more than confident finishing both sides is no guarantee against bowing :-( so don't rely on it. That said, you're using a very stable wood,...

I clearly live in a different world. I have worked for years with 3Mbs down and 1Mbs up. That's recently improved to about 6Mbs down. Not sure...

Very nice Dale. The wood combo is great, as is the workmanship. Creative idea that I may have to "borrow".

LOL. That's why I never go to those sites.

I appreciate all the advice. I'm currently digesting it all while reading up on veneering, and trying to decide exactly what to do. It seems like...

just went through this with the same with my LTX. Friend sent me replacement battery sites and said best bet. I thought about it a bit and went and...

I'd be getting back to him ASAP:rolleyes: