Activity Stream

I have a lightly used MiniMax 20 bandsaw with the Laguna Driftmaster fence installed. I live in Florida. Do you have a use for the saw as well as the...

Completed the rest of the resaws...but, since these 3 are a bit shorter...used a different vise, The one on the end of the bench,, Had to watch...

My Cousin near Sand Diego says there are commercial avacado rustlers who take loaded bins at night with forklifts and semi trucks. Ranchers do not...

I think the LEO is saying you can set up a camera so it has a good view of license plates and faces regardless of the camera being on public property...

Mark - Yes, they do! I have a Milwaukee 5625. It's a beast for sure. They don't seem to be around all that much though. Like just about everything...

We can build fences in Wintertime. When the ground gets wet late in the Fall, it stays wet until hot weather gets here. When I was building our...

Why not use hand tools? Rasps, chisels, and good layout ought to work. Mike

I would suggest that you and the neighbors cruise the farmers markets. If you see anyone selling persimmons just casually mention what has happened...

Follow up on the steady rest I posted a few weeks ago, This is a video of the first run. This is also my next project. I started this in the spring...

How much work do you do with sheet goods? Personally, I'd go with a longer slider. While I rarely work with sheet goods, when I do I wish I had the...

It might work in the sand with minimal rocks at my current property. At my previous property I had so many rocks and tree roots I went through three...

The joinery looks great. The finish looks good from the pics. I wish my first pieces looked as good! Well done.

I'll see your red clay subsoil, and raise you 1 waxy black prairie. Our prairie has 2 material phases: dry it is Rc89, wet it is bottomless snot.

That's why they make jack hammers....:D

I'm with Jim, what an odd comment by LE if the tree is on your property. Do you have any deer hunting friends or acquaintances? Maybe borrow a...

Thanks for that tip Jim. I picked one up today. ...a little pricy, $25, but as the sales guy pointed out, it IS Festool afterall. :rolleyes:

Bruce I used ours mostly for trying to hit an exact length on parts. It leaves a surface of fine saw marks, not glossy. The sheetmetal stand is very...

We are in the city but do see deer from time to time. The tree is 20 feet tall so they would only get the lowest fruit. If that was the case, I’d...

Well, today I just put a deposit down for a K700P order. Went with a 6.6 (2050mm) sliding table. I won't see the saw until about February 2023, but...

Jim, the first photo is after sanding. The second photo is what it originally was after putting the finish coat of gloss on. The color has dulled...

Here are the screws John is recommending in a more affordable quantity. I have it bookmarked for the future. U2 TOPSTAR SCREW 1/4 - 3/8 X 3-1/8 18...

Honestly the biggest problem with cameras is the price. The trail cameras people are suggesting are almost the same price/value as the stolen fruit....

Greg, the power is coming from a rotary phase converter. The readings were from the lines to ground. When i go l1 to l2, l1 to l3, l2 to l3 is get...

I know exactly how deep that would get in the red clay subsoil here when the ground is dry.

Going up to 12000, there should be pretty much a gleaming, near full gloss surface that can only be improved with polishing. Do keep in mind that...

As always, gentlemen, much obliged for the help. I think I will skip it.