Activity Stream

Nice! What kind of protocol? Is it just a free running serial stream? How did you sort out the data format? Was there any documentation?

Unless you just cash it and stuff your mattress with it, saving it is stimulus—whether it’s in a bank account or as an investment, that allows...

This might be a better link - https://www.clarkshardwood.com/. Outside Houston TX.

The brush I have found most useful for vacuuming fine dust is a Dyson Genuine Vacuum Cleaner Soft Dusting Brush Tool I purchased 3 of the...

I’m left handed, so I use the left slot. That way my right hand is closer to the blade, and if I lose that one it’s not such a big deal. Also, my...

Hello, I ordered a 220v 3hp sawstop table saw last week, I figured it could use the 220v 50amp outlet in the garage for the tesla, today I realized...

Bill, I credit my fancy new Knew Concepts fret saw for that result. The rest of the cuts were nearly as close to the baseline as the one in the...

My last ebay purchase was a Buy It Now at lower than most of the same item sold with auctions. My tendency with an auction is to just bid my max...

Thanks Larry sounds like fun. So cool to see most creekers are into giving and helping. I guess most of us are older and mature enough to know...

Outside of North America some countries have a Value Added Tax or other taxes on new items. People in those countries can avoid the taxes by...

This got me curious so I went on a search. Out of a dozen pages of articles, miter gauge reviews and build videos I found two cases where the miter...

Lay the drywall over the box and rotozip the hole, or use a keyhole saw. Or measure the drywall and carefully mark the location of the box and cut...

As several others have said, take it to a qualified motor rebuilding shop. All motors share some common characteristics. When they built the lathe...

Seems incredibly inexpensive. Even the grizzly 15 spindle manual version is 2600. I would want to see one in person. I have a 7 spindle head on...

If the top just has surface issues have it blanchard ground and its like new. I did that to PM66 cabinet saw and it worked great. I think it coast me...

$200 buy a used shaper. Bil lD

Like Perry said, if you could attach a pulley on the outboard spindle side, you could get a motor and turn it into a buffing / disc sanding rig. It...

4 psi will give about 10 feet of head pressure. 25 psi, about 60 feet. Set the pressure at 7 psi. The expansion tank needs to be equal to the...

I always attached the sacrificial top to my RAS with tiny little dots of Titebond and then weighted to do the clamping. When it got chewed up, a...

Thanks Aiden The one unusual feature - a small concern - about the blade is that it was ground and honed at 25 degrees. It is more usual for a...

Yes I have contacted Mackenzie They don't have the fingers I need

Never tried to do a 45 on a board on my J/P machine. Seems like a difficult thing to do as you are attempting to keep the board on the tables and...

The one that talks to your PC is easy to connect with. I've got mine talking to a Raspberry Pi through node-red and will eventually set it up to...

Trying to avoid damage to saw blade if it hits one.

Are you building just one set of cabinets, or do you do this for a living? For a single set of cabinets, I would use a jig and plunge router with a...