Activity Stream

Hi Mike I've heard (sic) great things about both the Empire and Jelco. What cartridge? I had a Rega 3 some years back. A classic. Now I run a...

Possibly a pause to cooldown one or both of the USB drives, but nothing relevant shows in the logs and no error messages showing anywhere. Anybody...

Neil -- I'll keep that technique in mind should arthritis make it too painful for me to turn the chuck key by hand. Of course, when that day comes, I...

There are tons of videos of guys dropping trees of that diameter with saws like that. Whoever thought of framing that pic gets two thumbs up. :)

Riiiiiiight..........:rolleyes: Fun tho. Just like the old days.

Would a wooden coffin plane satisfy the smoother requirement? Mike

I believe you have an earlier version than he one in the ad. Note the red locking handle on the ad. I have one like yours, that I got used, and...

The clear plastic is a good idea, but you should use polycarbonate (Lexan) which won't crack. PVC lumber and trim are readily available in home store...

Windows 10? Is the computer online? One bad guess would be Microsoft may be invading your computer and pausing the copying-- Could the pause be...

Malcom? think he used to be on here, built this one, which is pretty interesting. https://www.youtube.com/watch?v=O6-ytBntzgM

I might think of trying Plexiglass and clear silicone caulk rather than plywood?

Steve, What is the primary voltage of your DC motor controller? If it is 120 volts, it could be a result of the rectifier creating a neutral - ground...

As long as the HP is adequate to turn the impeller at full speed the HP is not the important factor, the impeller size is. If a 13" impeller is...

Take a look at the FOG (Festool Owners Group) website. Workbenches built from 8020 are a huge topic for discussion there.

ok, I went and got a Spofford 112 and tortured it. First removed the thumbscrew and put the chuck in the vice with two small pieces of offset ply,...

Jim, in actuality I have a small space. Storage is mostly at the rear of a double garage. Over three decades of serious woodworking, until now, I...

That's like saying a we need small CAT 1 (CAT 1-A for sub-compacts) and a Large CAT 1(CAT 1-B for compacts) It kind of makes the system that...

Hi Bernie, Not sure if this is what you're looking for, but I had been in touch with the folks at www.ecogate.com a while back. They have...

Yea, I should have specidied, mine is the fuel version, didn't even know they made a non fuel version. Mine came with a 9 a/hr battery. I was...

Paul, I've never seen that before. Luke's comment about the alignment is relevant, because if you can square the two halves up is the thumbscrew...

Looks like that's what I'll do seeing that I just picked-up my SawStop PCS-175 early. :D My local Woodcraft store had an order cancelation & I was...

Ed, I agree that folks with sub-compact tractors have to be picky about what implements they decide to put behind it, but the market has a lot of...

Just to be clear, the bit is held off center? Or is the bit held straight?

If you can, get the fuel version and an 8ah battery or larger. First time I used mine, I could have sworn it was a corded saw. It seems to have as...

Thanks. As practically unused and complete I was hoping it would be worth more. But looking at Doug’s post, maybe not. I sure overpaid at that...

pretty much. My fence is longer. Is that a current ad? Okay found it thanks. 6 to 9 month delivery:eek: