Activity Stream

I would set up before and after school clubs for children The purpose of these clubs would be to provide meals for children of parents who have...

Yeah. It's just more difficult to do a champher than a 90 degree cut. A little lateral movement doing an ordinary 90 doesnt botch the squareness....

That is a real kick in the backside when you think about it. Someone having more money than the can spend setting up an estate so they can have...

Dan, my LN #62 was used mostly for shooting. Sure it could pull as fine a shaving as any other of my planes: A micrometer tells the story: ...

It sounds like the board might be riding up the fence as you go through the cut. Normally you push into the table with a fair amount of pressure,...

Start a foundation for ending generational poverty with an emphasis on first generation college scholarships.

Throw out the lock washers, use lock tite. By 1880 they knew lock washers did not work. The knockoff lock tite from harbor freight is better then...

It sounds like this is a 22124 craftsman. Is that correct? There’s also some confusion here… If it is that saw they are cabinet mounted trunnions...

If you get a chance, post some pictures of your epoxinator. The bowl looks interesting.

I guess 25.5mm

I would mount that switch box out 5-6 inches so it just almost sticks out from the front edge of the table. Stack up some 2x4 to get the distance...

Never had a MOPA so I know very little about them. I just no that there's no "Q" setting on my fibers! as to 'the look' of the mark you want to...

My guess is you started a flat area on the beginning of the board. I say this because sometimes when I face boards with a twist and nasty warp the...

Well geeze Myk, I could have taken down a 3' dogwood with my pocket knife. I know, I know, I'm sorry. :D

I don’t play the lottery and think it’s really bad. It’s stupid to give someone a lot of money unless it’s a non lottery event to help someone out of...

One Beeeleeon Dollars... That's enough that you can spend $100,000 per day every day for 25 years before burning thru it. So, at that rate: ...

Hate to appear stupid but what is (are) PALS??? Pediatric Advanced Life Support I get - but on a saw??? I did use the google and the search function...

I had a 7'x16' C.H.I. insulated door installed 3 years ago. My Dayton electric heater costs dropped drastically. The door faces SSE and the windows...

You can ask Sir Google go guide you to a gutter sizing calculator. The one I used when building my shop took into consideration my location, roof...

Good info here: https://abrasiveresource.blogspot.com/2015/10/making-your-own-abrasive-belts.html I do recall that one vendor I buy wide belts...

You don't have to worry about ice on your front steps and sidewalk making them unsafe.

Mark, have you contacted MacKenzie at Akeda? She still has some parts available and will send you a list. Email is mlear@akeda.com.

I don’t think I could live with those giant outriggers, I would be tripping over them all the time. I put mine on 4” adjustable feet, easy enough to...