Activity Stream

Some nice finds Richard. With removable handles it would likely be fairly simple to make a pair of handles for the draw knife that would angle it for...

A local sporting goods store should have baseball Glove Oil or Glove Cleaner (not to be confused with a Twilight Zone episode) that will do the...

Nice work Stan!! I see you have one of the smaller digitizing tablets (in addition to your Jumbo setup). My smallest tablet is 12" x 18", and comes...

I couldn't tell if you were just kidding with your question. Keith - I'm pretty sure I have seen a large cnc plasma table in Stan's shop (along with...

That could be. The piece I sliced up was about 1" thick, and air dried indoors about a year at the time I cut it. The slices were stacked with...

Interesting. The cut is fairly smooth but II assumed a smoother surface would be needed for decent adhesion. These slices will be cut to shape and...

Running it above 125 or so is a waste of money and reduces continous flow rate. Regulate for a max psi slightly above the desired pressure then...

Thanks Phil, at 72 I think this will be my last upgrade.:D At least, for a router cabinet.;) BTW, I'm near Kings Mill, Lapeer County.

Today's little excursion....wasn't that great, even for a Thursday.. Spent $23.50, total....with $18 of it for that Stanley No. 923-8in brace......

Very happy for your recovery Ronald!

I was a little achy after both shots and arm was pretty sore for about 3 days. (Moderna) I did have Covid as some of you know and it was a pretty...

To answer your question, a random orbit sander with 120 grit is not the way to cut out saw marks. Too much heat as you found out and it will not...

Thanks for the post Rob. The consumer-shipping relationship a pretty complicated machine. I also found the following vid pretty interesting. lumber

I cut elm occasionally but it's dead when I cut it and often somewhat spalted. I don't know about red elm, I think that what we have around here is...

Maybe not a common choice, but it is on the list of wood choices at Whitacre's Furniture in Hudson, IL. They sell Amish made furniture and the Amish...

In my inexperienced novice opinion, I would worry less about the small tiny gaps between each lamination and more about getting everything nicely...

Second Moderna shot today around noon. Just a sore arm so far. Fingers crossed it stays that way! 10-12 hours after the shot is supposed to be when...

Unfortunately we’ve know this kind of throng has been going on for years. Hopefully the powers that be can agree to make a long term commitment to...

Whatever wood you choose, just throwing out general dimensions don’t do us a lot of good. You know what it looks like and how it is designed. Do a...

You'll probably have to buy elm from a local sawmill, if it is native to your area. It will probably be green, and you'll have to dry it your self....

Elm is not a common choice here in Illinois. All things considered, it might be worth considering other wood species. Maybe your area has some...

Is it common for companies to charge 6% to use a credit card? I don't think I've run into that before. And did I hear that right? Felder will...

Interesting watching Las Vegas grow and Lake Mead shrink.

https://www.amazon.com/HQMPC-Garden-Connect-Connectors-Connector/dp/B07FMVR1YL/ref=mp_s_a_1_9?dchild=1&keywords=garden+hose+quick+connect&qid=16191390...