Activity Stream

Nice looking set but not really my style. Just got a thing for socket chisels. jtk

The stick profile has a bearing.

I’ll give another vote for the Festool OF1400. I know they’re spendy, but once I picked one up off Festool Recon I basically stopped using every...

I got rid of my 16 gauge after getting the Porter Cable 15 gauge. I first bought a Hitachi but it would not take a 15 ga PC nail which they sell at...

I spend some time in attics and am a big fan of the foil radiant barrier. It may be my own subconscious bias but it seems like the radiant barrier...

When I made my Roubo, I used hard maple and Jatoba. The Jatoba was used for the chop, the sliding deadman, and the strip in the top for the dogholes...

I have the Oneide Mini Gorilla for my shop as well. It might be more than you need for the tools you mentioned, but I really like mine and it would...

We've locked onto the reality show 'Alone'. The contestants have to survive 100 days in the wild, taking just 10 items with them. They do all the...

The paint I linked too says it does not affect cell phone or tv signals so not electrically conductive. maybe the paint insulates the aluminum...

after it is done add a brass kickplate to cover it all. Bil lD

Yeah, I am saying the fence is skewed or warped. It was not like this the first few years I had this fence. I havnt done much woodworking this last...

Side note: I put a .8mm nozzle on my printer so it lays down plastic really fast. A 4 inch dust collector fitting of ~3" in length takes me about 2...

Yep. My 3 kids and wife are all streaming addicts. Me not so much, but the wife and I now both work at home and the kids are doing remote school...

Not a 2nd pass, a full depth + 1/16-1/8". It still tears out but its deep enough it cuts out the tear out. It doesn't work with a bearing guided...

Pfeil makes good tools. I have a lot of their carving tools. And like John, for certain things I prefer the shorter D handle gouges. And a note...

Jealous of all that fun/shop space. Getting some air moving should help with the condensation, especially in the summer months. I can see my...

Where are you located? Perhaps an experienced veneer person could help you. Mike

Are you saying the fence is skewed or warped? That fence can be adjusted left or right at the cam connection.

kevin...just trying to make sure I’m following...are you saying let your stile or rail be a little wider than needed because that would leave room...

im trying to think through how to make a zero clearance fence for a stile or rail router bit that has a bearing on it

Your wood "straightedge". appears to have a split in it so I assume it is not straight. Get something better to use as. a reference. Bill D

Too true, Jim. By comparison, the red frame looks inviting! It took the stratospheric Blue Spruce price to nudge me off the fence. It always goes...

Thank you Malcolm! I have used resoursinol repairing aircraft wings. I have plastic resin on hand which I used on aircraft also. They finally...

A sacrificial zero clearance fence will give you nice clean cuts.

Watch Stumpy Nubs video titled "How a bucket and a donut changed my dust collector." It's a fairly new video. Watched it last night and will be using...

The gouges that I have listed are the 10" full-sized mallet tools and not the smaller tools that are depicted in the link above. You can price the...

If you can post picture of manifold and piping it would help a lot. Do you have expansion tank? How many feet of tubing and number of loops in...

Shur'nuf. Back in the late '70s, early '80s I stayed on top of everything. Had a genuine Teletype connected to a 110 baud modem and a 6800 SWTPC...

When I had a RAS in a 16x16 shop I put it on one wall with about 10-12' to the left. To the right was the door so if needed I could open the door...

Ron, A lot to like from the photo. Firmer and tanged, not sure about the Ironwood but I expect it will stand up to the hammer. ken