Activity Stream

Fixed the link I think . . .

That there is a smell is telling me that there is a broken pipe or a dry trap

I've not done it, but you might have the plumber do a smoke test to check for broken pipes, in and out of the house, and to see if the vent pipes...

Awesome, good to know Jim. I'll just make sure they're all a good fit from the get go and proceed from there. Any thoughts on plywood vs mdf for...

Ok good to know, now I don't have to worry about it so much. The rails and stiles will only be about 2.5" wide. Do you think I should go with plywood...

Thanks for all the info John. This is definitely what I was hoping to hear. I'll look into the Iwata and others you mentioned. I found one that makes...

It's called research. Doing your own. I would know co/city/twnshp/school/postal, even cable boundaries before I bought. .

thanks for all the additional thoughts and info. by drain vents you mean the pipes that go up through the roof? think so, One was the original...

I've found the OLson AllPro blades to cut really well and last a long time ifyou do not hit any metal. I also resharpen them with a diamond and then...

Some machines are made in Asia, and many re sellers just slap their name tag on it. this is why you see so many machines from many makers, that look...

As others have mentioned, there are some big restrictions on producing just about anything right now. I’m just grateful that LV and LN seem to be...

Damn, amazing what you can find on Etsy Those Drake castings legs are spectacular... and while they do cost.... not such a bad price considering...

We have an undermounted stainless steel sink with quartz countertop in the kitchen. The front part of the countertop is 4" which seems fine, but I...

I have a slightly less than flat bottom too. I blame the doughnuts.:D

They are the largest door slab manufacture in the world. most of the doors you see for sale anywhere are made by them, and resold. A vast majority...

Thanks for that link Adam. That might be a winner. Masonite didn't come up in any of my searches.

The company has to protect their asset. Their staff. So scaling back is only sensible until COVID is under control with minimal impact.

Hi David-- The benefit is in ease and accuracy, and I qualified it as being my opinion. I didn't mean to suggest it was "wrong" to do it by...

Stationary machines are still manufactured in Europe. However, they’re more expensive than machines built in Asia.

Sure! I did what you're probably doing - looking at the single stage things, looking at the oneida add ons, etc.... by the time you bodge all...

This thread is 3 years old, so chances are that the deal either was done or has fallen through, I imagine.

Funny thing is, in the law school I went to, one professor did spend some time covering the subject of "pick your battles", zero sum gains,...

call your local door shop, you will be surprised that it wont be hard or expensive to order a 1/2 lite door slab from Masonite. its weird they...

Reed -- I would assume have a large bowl or two at a booth might be worth while as a means of attracting customers into your booth. Such bowls can be...

I think the general consensus is Taiwan is a little better than China. But you can't judge a product purely off the manufacture location, because as...

Might be easier to set up a wireless security camera inside and she can monitor you from her computer or phone. Or put a wired camera inside and a...

Yeah the CFM stats are a bit of a misnomer as there isn't a standard on how they're actually testing them to advertise those numbers. Mini Gorilla is...