Count me in.
You must be a SawMill Creek Contributor
Count me in.
You must be a SawMill Creek Contributor
Last edited by Glenn Clabo; 11-03-2008 at 9:55 PM.
Count me in please...
Dave
Epilog Profile 25 watt w/rotary, Homemade CNC, Vinyl Cutter, VCarve 4, Corel X3, Photoshop, Illustrator, etc.
Count me in please
please opt me in and thank you to Mike
Epilog mini 24 with 45 watts
X3
More wood working tools then I deserve
Please put me on the list for the drawing.
Add me in too. Thanks for your generosity.
Chris
From the Land of the Great Wet North. Home of 12-15 feet of rain a year!
Universal M360 60 watt, Corel X4,Taig CNC Mill, Taig Lathe, Fully equipped Jewelry and Lapidary Studio.
I bought a box of Michael's wood and can attest that it is a fine product.
Thanks Michael!
Steve Eide
Versalaser 300 30 watt; Corel Draw X4; PhotoGrav 3
Please count me in.
Thanks,
Will
Prc 2200W 4' x 8'
Emission Tech 60W 2' x 4' (JUNK)
Coherant 400W Dual Beam 4' x 8'
ULS LS 100E Engravers 17.5" x 11"
Kern 150W HSE 6' X 10'
ULS 25PS 18" x 24" 30W with Rotary
Count me in!!!
Pick me....pick me!!!
You must be a SawMill Creek Contributor
Last edited by Glenn Clabo; 11-03-2008 at 9:55 PM.
Garrick Crocker
Gainesville, Florida
Accuris Powersharp 16, Corel X3
Thank You for the great donation
Lasers are COOL!
Certainly want in on this...
Thanks
Tim Baude
Legends Awards & Custom Engraving
Epilog Helix 24, 45w, CorelDRAW X4
I would also like to have my name in the hat. Thanks for the generous donation I hope to win this and see that all the good comments are correct.
EPILOG LEGEND 32 60 WATT, CORELDRAWX5, PhotoGraV2.11, strip heater, PUNTA GORDA, FLORIDA
Great product, please count me in.
Dave
Count me in on this one!