Here goes...my first post. I'm starting off on an ambitious kitchen cabinet project and have some questions and any advise for this newbie would be greatly appreciated.
1) Since all the cabinet boxes will not be seen due to face frames, outside panels, etc., can I go with Shop Grade A1 plywood which is about 1/2 the price as compared to the real good stuff?
2) Does it matter if I go with Red Birch or Maple plywood? Maybe I should use the same material I plan on using for the drawers so when opened, it all looks the same?
3) Do these boxes need to be finished on the inside? If so, any recommendations on what to use?