Originally Posted by
Dan Hintz
I intend to break the machine down and rebuild it on a larger table (already have the new slides picked out). Next will be some air assist tools and a vacuum table. I'm thinking a laser pointer would be nice, so probably some new optics holders.
And I fully intend to dump the dongle, just need to spend some time with the software logic analyzer. If it proves too troublesome, I'll completely replace the drivers and go with Mach3
Of course then it won't be a Rabbit, it'll be a Jackalope (if you don't know what a Jackalope is, google it and look at the "Images" tab at the top of google).
Lasers : Trotec Speedy 300 75W, Trotec Speedy 300 80W, Galvo Fiber Laser 20W
Printers : Mimaki UJF-6042 UV Flatbed Printer , HP Designjet L26500 61" Wide Format Latex Printer, Summa S140-T 48" Vinyl Plotter
Router : ShopBot 48" x 96" CNC Router Rotary Engravers : (2) Xenetech XOT 16 x 25 Rotary Engravers
Real name Steve but that name was taken on the forum. Used Middle name. Call me Steve or Scott, doesn't matter.