Just completed three cherry side tables with walnut drawer faces.
IMG_0141.jpg IMG_0140.jpg
Started on these about 15 months ago.
Good thing no one is counting on me earning a living from making and selling furniture.
Learned many techniques and skills in the process. I acknowledge and appreciate the contributions of the following individuals in this endeavor:
Steve Latta — videos and articles on building a Federal side table; tools and techniques for making and cutting veneer inlay, Fine Woodworking, March/April 2015
Matthew Teague — panel raising jig, Fine Woodworking Nov/Dec 2004
Christian Becksvoort — techniques for making and applying wipe on oil finish, Fine Woodworking
Rob Cosman — methods and tools for cutting dovetails
Lisa Starr — printing a blade guard for the crosscut sled, Sawmill Creek
Chris A Edwards — downdraft table recommendation, Sawmill Creek
Jim Becker — Noden Adjust-A-Bench recommendation, Sawmill Creek
Carmonius Finsnickeri — making a Domino jig, Sawmill Creek/YouTube
Steven Woodward — methods for building crosscut sled and tapering jig, Sawmill Creek/YouTube