I have a large table made from reclaimed, unfinished redwood that is in a screened in porch so while not exposed to the elements it is subjected to swings in humidity (including hot, humid Virginia summers). It also gets dusty and dirty since the porches is screened, not closed.
The desire is to apply either a finish or an oil so that it isn’t dried out, and can also be cleaned off occasionally. But we don’t want any gloss or really any kind of sheen. I thought about a BLO and beeswax finish, but I’m concerned about mold and mildew. I’m also concerned that if that doesn’t work well it would be difficult to apply a finish over it with the wax content.
Would Watco Danish oil provide a growth medium for mold and mildew? Lastly I’m thinking perhaps an oil/varnish finish like a few coats of Waterlox original. If it builds any sheen I figure I’d just knock it back with synthetic steel wool.
I’d appreciate any feedback and advice.
Thanks!