Skinny Bass.jpgPlanning on making a new type bass drum. 18" diameter, open face, 6" (or so) deep. Going to make it out of lepoardwood (have a bunch of 8/4 and don't like it much). Going to make 3 segmented rings, glue them face to face to make a rough cylinder, and turn it to 18" diameter. I can then turn half the inside thin, reverse it in the chuck and turn the other half of the inside. Buying one is $310 + shipping & tax = $425. I can buy the hardware (sans legs which I will make) for just under $120. Here's the link to the commercial version https://www.sidekickdrums.com/shop/s...m-single-head/