I’ve read through about 4 pages of similar threads but wanted to bring up this discussion again and see if I could get some recommendations for my particular set-up. Small 1 car garage in a 100 year old house with a single 20a circuit. Looking for dust collection for my Sawstop Contractor. I don’t have a planer, jointer, etc but I do have a very good dust extractor for hooking up to my ROS sander and any handheld tools, so I’m really just looking for something to handle the table saw.
can I get away with one of those 1hp / 7a ~650cfm units like the ShopFox that Acme sells or the Rockler unit?
If I put a cyclone in-line do I also need a DC with a filter?
lastly those stand alone air circulation filter units, like the ones that hang from the ceiling. If I’m trying to keep my budget in check what combo of equip should i prioritize?
low ~650 CFM
higher ~1100 CFM
cyclone
wynn (or alternative) filter
additional air circulation filter
restrictions: table saw only, 1x20a circuit, weekend hobbyist
if I ever get a planer or jointer I’d prob also re-wire add another 20a circuit and get a 2hp DC but that’s not happening anytime soon.