Hi guys.
Im making a couple dozen small drawers in which to store nuts and bolts. Each drawer is 1 1/2" wide, 5" long and 1 1/4" high. Using 1/4" thick poplar. I am making a single, 3/4" wide through-dovetail at each corner. I got to wondering if there is any reason that I need to make 2 or more tails on each corner?
I've already made 2 of them and the joints are very strong as is. They are also quick to make because I only have to cut a single DT for each corner. Any real advantage to having more tails on s project this small? (This is garage furniture.)
Thank you!
Fred