Looking to find a better solution for the shop in respects to cleaning the floor and tools. I have all my tools connected to the DC, which other than the table saw extraction, all work pretty good. I have a port specifically in the DC run that I have a Dust Right collapsible hose with floor sweeping attachment, but I'd give that whole contraption a 2 outta 5 stars. Wheels never stay in, collapsible is kinda misleading and it's not really quick disconnects. It's also 4", which for the floor sweeping is fine, but for finer cleaning of the dust overspray on tools it's very cumbersome. I do have a nice big shop vac that does work quite well, but it's just one more item in a shop that does have some tight spaces. Trying to pull it around is a pain. Would like to find something that I could have multiple connection points in the shop and easily switch from floor sweeping to just the hose or hose with a brush attachment on the end that's not so cumbersome. Maybe a smaller shop vac unit on wheels compared to the mack truck version I have.
My DC setup is 6" and 4" PVC piping. Only one port steps down to a 2" port for sanding, so I open up the port for the over blade TS collection port to not starve the machine. Other than that it's all 6" or 4".
Or maybe some sorta extra hose setup for the Shopvac and just park it in one place. Maybe a small DC system for that, short runs just to make getting 1/2 of the shop easier than the other.
The other thing I have to deal with, is to much suction and it picks up the floor mats, those interlocking things. But that's minor in the grand scheme.
What have others found that they like?