Grizzly g0673 10hp dust collector

[Tom Dixon]

Really for a one man shop likely a G0442 would be a better option at only $500 more than the G0673. No need for any add on cost for a cyclone and an 8" trunk should be sufficient for your needs. It's what I put in my shop. I built an external closet for mine to reduce noise but I am using the filters and not venting outside to keep my shop moisture content low in the summer and not lose heat in the winter. It is a really good value for a 5HP single phase cyclone DC.

Workshop_1.jpg DC_Closet.jpg DSC03183.jpg

[james manutes]

The most interesting thing you've offered to me is the 130 ft. trunk line . All 12 drops off a single line ? If so a re-design is needed to me , multiple smaller branches or multiple DC's . Can you offer a sketch or a drawing ? Really not too sure what you have .

[james manutes]

Oneida C2500 cyclone body , 12" inlet is $1860 .