Just want to start out by saying I am probably on the lazy side so just start there. I currently have a Delta floor standing drill press with the step pully speed control system. I find I am constantly going from a slow speed to a much higher speed and back again. I was considering getting a more "automatic" variable speed drill press. I see there are mechanical variable speed types and electronic types. It appears that one drawback of the electronic is you can lose torque at lower speeds and the mechanical circumvents this. Those of you who have one of these style, can you tell me your experience and why you like the one method over the other? Also can you tell me the brand of drill press you ended up with and how you lke it? Thanks