I have a Jointer, planer and drum sander SawStop to help prepare my boards for box making. I found I use my Jointer occasionally and then my drum sander to get to thickness desired. I wondered how many of you folks use hand planes to dimension? I’m thinking of selling the planer since I use the drum sander and selling the Jointer and use my LN 62 to edge joint. The 62 will do a ok job of planing to rough dimension and the drum sand to finish. I also have a LN scrub and router plane. What other hand planes do you folks use? I have a router setup in a nice table with all th Incra gear but I’m finding I enjoy handplanes. I could replace a lot of power equipment with planes and enjoy the process. Wondered how many of you build boxes with hand tools exclusively. At 74 I want to enjoy the process rather than worrying about what I end up producing. I found I thoroughly enjoy planing.