This cabinet/bookshelf has been in the works for a while. A few other projects have been finished around it.
My plan was to have three drawers and three shelves. If the top surface counts as a shelf then it is almost done:
Almost Done.jpg
The top back piece is about all that is left before cutting a piece of 1/4" (6 mm in reality) plywood for the back. My mind will be mulling over if it should be a simple curved back or if some other shape should be cut before it is stained to match the rest.
This is the piece for which the drawers were being made in my Tails of Pins to Come thread. Two of the drawers will get handles before it is brought into the house. The invisible drawer already has an invisible handle.
jtk