Originally Posted by
Jerome Stanek
I see there are hundreds of posts in the Problems and support forum and a lot of them are closed before they are addressed
In all fairness to GF, that's the method they use for one leg of their support. You can email them OR post it in the support section. If you post it in the support section, they lock it when it's been logged into their support system. It's not locked because they don't want people posting, it's because it's how they setup the support forum. Post, when we see it, we'll acknowledge it by locking it. Makes it look like they just lock anything with a problem, but that's not the case at all.
Lasers : Trotec Speedy 300 75W, Trotec Speedy 300 80W, Galvo Fiber Laser 20W
Printers : Mimaki UJF-6042 UV Flatbed Printer , HP Designjet L26500 61" Wide Format Latex Printer, Summa S140-T 48" Vinyl Plotter
Router : ShopBot 48" x 96" CNC Router Rotary Engravers : (2) Xenetech XOT 16 x 25 Rotary Engravers
Real name Steve but that name was taken on the forum. Used Middle name. Call me Steve or Scott, doesn't matter.