Trying to make this cabinet and I have the plywood down to width now I just need to square one end and cut the other to length but this is seemingly impossible. I am using a guide with my circular saw. when I place my square on the wood and the guide the guide is square. Then after I make my cut the guide is still square. but the cut is not. I will upload pictures. When I use my square as a straight edge on the actual cut the cut isn't straight. I tried using my table saw to cut the wood but the table isn't long enough and the miter gauge hangs off the table a little. I tried it anyway and got the exact same cut as with my circular saw. What is going on??? I'm very frustrated. The gaps and everything is hard to see in the pictures but I hope they help.
IMG_2962.jpgIMG_2963.jpgIMG_2966.jpgIMG_2967.jpg