One thing to note about these tables is they also make excellent outfeed support for bandsaw, shapers etc that are either mobile or don't warrant the space for a permanent outfeed table. If you don't need a wide variation in height (more likely with a multifunction outfeed table than what has been discussed in this thread) I prefer the non-hydraulic versions like a motorcycle scissor jack since it is mechanical and can not leak down like some people report the Harbor Freight lifts can.
https://smile.amazon.com/dp/B0196PAZ...ure-scomp-wm-4
Of all the laws Brandolini's may be the most universally true.
Deep thought for the day:
Your bandsaw weighs more when you leave the spring compressed instead of relieving the tension.