I made this little plane from plans in "Wood Magazine" a number of years ago. I use it to knock off the sharp corners on furniture projects.
bevelplane.jpg
I made this little plane from plans in "Wood Magazine" a number of years ago. I use it to knock off the sharp corners on furniture projects.
bevelplane.jpg
Lee Schierer
USNA '71
Go Navy!
My advice, comments and suggestions are free, but it costs money to run the site. If you found something of value here please give a little something back by becoming a contributor! Please Contribute
These planes really are something else.
Makes mine look like something a kid hacked out with claw hammer in comparison..
One could also use a spokeshave. Was doing a round-over tonight...about the same idea as a champfer
bottom edges.JPG
Just a stanley Cordovan 60-1/2 block plane. Grab and go.
Stewie, that's some really cool stuff.
Last edited by Zahid Naqvi; 02-27-2021 at 3:37 PM.
The means by which an end is reached must exemplify the value of the end itself.
"All that is necessary for the triumph of evil is that good men do nothing."
“If you want to know what a man's like, take a good look at how he treats his inferiors, not his equals.”
Since everyone is showing off their chamfer planes here are mine:
Chamfer Planes.jpg
They are each made for a set size. They both work quite well.
jtk
"A pessimist sees the difficulty in every opportunity; an optimist sees the opportunity in every difficulty."
- Sir Winston Churchill (1874-1965)
apron1 (640x640).jpg
It is an apron plane with wood held on by two small round magnets. It works great.