Over the past few months, I've been slowly making a Japanese workbench.
I started as a free discarded coffee table (that I found on the way to a Japanese restaurant).
I've ripped it down, squared the sides, stripped and refinished it.
Now, I'm going to chamfer the corners, and I'd like to use a Japanese chamfer plane.
What do you guys recommend?
I see there's an inexpensive one from Kakuri (sold by Lee Valley) and a more expensive one from Stu ($120) which is sold at around $160 at Hida Tool.
I'm not really sure what to look for, and would appreciate input.