I just bought and old Epilog Summit Laser can the Laser tube be recharged on those. Also I'm new to Lasers any Suggestions. I will be using Coral Draw.
I just bought and old Epilog Summit Laser can the Laser tube be recharged on those. Also I'm new to Lasers any Suggestions. I will be using Coral Draw.
Ernest
Welcome to SMC. I suggest you contact Epilog tech support with your question. It's free and you can get the right answer.
Are you sure the tube needs recharging?
Mike Null
St. Louis Laser, Inc.
Trotec Speedy 300, 80 watt
Gravograph IS400
Woodworking shop CLTT and Laser Sublimation
Dye Sublimation
CorelDraw X5, X7
Thanks for the info I will do that
Does it operate from Win 95 or XP?
Just Curious.... I am looking for the board for my old Summit that still runs on Win 95.... that will make it run on XP.
Good Luck,
AL
1 Laser, 4 CarveWrights, Star 912 Rotary, CLTT, Sublimation, FC7000 Vinyl, 911 Signs, Street Signs, Tourist Products and more.
Home of the Fire Department "Epoxy Dome Accountability Tag and Accountability Boards".
It runs on 98 I'm not sure if this model is upgradeable to XP or not
1 Laser, 4 CarveWrights, Star 912 Rotary, CLTT, Sublimation, FC7000 Vinyl, 911 Signs, Street Signs, Tourist Products and more.
Home of the Fire Department "Epoxy Dome Accountability Tag and Accountability Boards".
Ernest,I just bought and old Epilog Summit Laser can the Laser tube be recharged on those. .
Most of the Summit tubes cannot be recharged. Epilog used the Synrad tube during the Summit days and Synrad refuses to fix or supply parts for any tube over 10 years old. Epilog can recharge some of them in house, but they won't know for sure unless you send the tube to them for evaluation.
Tech support will clarify this for you if you like. If you have not already called them, have the SN, firmware version(watch display during boot up) and it would be a good idea to have removed the laser's cover to allow you to describe it them (certain vintages were different colors and had different end caps).
Roy Brewer[SIGPIC][/SIGPIC]
Epilog/Control Laser/Roland engravers/Xenetech