-
Here's my setup. Since I used the longer LS positioner I had to extend the aux table a bit. I may do a cleaner install later but it works fine now. I also put a Proscale setup on the crosscut fence and really like it. I have a Powermatic 65 snugged up against the rear of the saw, with a SS C.I. router table in the left wing, and a LS positioner for the router table as well. The router table L.S. positioner was originally on the slider, but then later I got the longer model. It only took nine months for it to arrive.
IMG_0809.jpg
IMG_0810.jpg
IMG_0811.jpg
Last edited by Dave Cav; 10-24-2021 at 7:26 PM.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules