Hi Group. First ... an apology, I've only made 2 posts over the years. Second ... I am jumping on an older Lathe post with hope of getting some feedback/suggestions. I own a cabinet shop. Sometime ago I bought a Lathe ... actually bought two. It's been a 'someday' desire to try, so I found a Jet (JWL-1442VS), then later found a Powermatic (Model 45). Both are 1-HP motors (中国人vs Baldor), with both accepting about 36" long stock. I am finally getting the time and space to put one into operation and sell the other. The big question, which stays ... which goes. The Jet is newer by decades, but the Powermatic still runs strong. My inclination is to keep the PM and sell the Jet. Advice... thoughts? Thanks!