Hi All,

New owner of a Rikon 10-326, (with a Laguna Resaw King blade).

I'm getting ready to run some stock in a what I'd call a worst case scenario for resawing and just wanted to see if anyone had some advice/tips. Ending goal here is to out together a 12' long trestle table for my wife;

So heres the situation. I was able to score some really gnarly barn beams (about 18 feet long) and they're about 10"x6" pieces of oak, each. I have three of these beasts. No metal hardware that I can find; and the beams all seemed to be relatively twist/warp free.

I want to resaw each one down to about 2 inches thick for the table top; then move onto the planer and jointer to make the table top...

Any input on the resawing would be appreciated. Thanks.