Here is the second piece of our baby room that I finally finished and brought up to her room. It goes with the crib I built about a month ago:
http://www.sawmillcreek.org/showthread.php?t=133526

It is made out of cherry with curly maple inlays. The top is made of one 11" wide board and the sides are of a 12" wide and a smaller board.
All drawer fronts are from one board resawn.
The drawer boxes are from maple with all 4 corners box joint.
I made a simple box joint jig to be used with my Incra miter gauge and it worked great (micro-adjustable). It was my first try at box joints as well as first try at ogee feet. I am satisfied how they came out.
The finish is Don's magic mix. The drawer fronts have an amazing grain that don't fully show in the photos.
I have a few progress pics that will post if there is interest.

f1.JPGf9.JPG
f2.JPGf7.JPG
f8.jpgf4.JPG