The Winner is Jackie McGowan
Please contact Mike for shipping information
St. Louis LASER
SMC's own Mike Null has offered to sponsor a FreeStuff Drawing of one of his LaZer Cutting Grids.
The grid size is the winner's choice up to 24"x36" with shipping paid by Mike, anywhere in the Continental. U.S.
The grid is made of powder coated aluminum 0.50" thick with half inch square cells. The
grid sits on 3/4" square wood risers with tabs which fit against the rulers
on the engraving table allowing for 0-0 positioning. The risers permit efficient airflow under the grid for removal of smoke and residue which contaminate the underside of your work. The 1/2" cells are larger permitting better smoke evacuation and permitting small waste cuts to fall through to the table.
This grid is a woodworkers solution to the vector cutting problem.
Efficient, durable and very economical.
Example of Grids sizes and prices are as follows: Sizes are ± 1/4"
12"x18" $59.95
12"x24" 69.95
18"x24" 79.95
24"x36" 129.95
Custom sizes available up to 24"x48". Allow 2 weeks additional.
The grid in the picture is an 18x24 and the picture does not show the
positioning tabs.
Exceeding Your Expectations
Because of the nature of this prize this is an Opt-In FreeStuff Drawing. Only SMC Contributors who would like to win Mike's Vector Cutting Grid should post a message in this thread in order to be eligible for the drawing.
We will draw a winner for this prize on Wednesday Dec 10, 2009. The winner will be announced and will have one week to respond in this thread to claim their prize. Good luck to everyone and thanks to Mike Null for donating this prize.Attached Thumbnails
