Randy,
You're right, the block itself is aluminum.
Randy,
You're right, the block itself is aluminum.
The third picture, close up of the brake itself shows pretty much how far the blade spins after the brake is activated. It's not far. Combine that with the blade dropping (which would seem to effectively move the blade backwards) and you've got very little forward movement of the teeth once the brake is activated.
While this is good technology, there's an OSHA-type guy on another forum who bashes SawStop because you have to actually touch the blade to activate the safety feature. I've got mixed feelings about that statement, but theoretically, he's right. A perfect safety feature would prevent contact in the first place. Someday maybe technology will get to that point.
I saw the hot dog demo at the Chicago WW show. It's loud and impressive. I was at least as impressed with the fit and finish of the saw itself. I'm not completely convinced that the saw is worth the price, but as one other poster said, it's cheaper than a blade-touch accident.
One thing that I don't think I've heard mentioned is what percent of accidents on the TS involve actually touching the blade. Seems to me that most accidents I've heard about involve kickback where the work piece or cutoff causes the damage. The last accident I heard about (I think on this forum) was with a splitter with pawls was in place. SawStop technology would not have prevented that.
My $0.02 (or $0.03).
Blaine
Well, until the Table saw is equipped with ESP, the Saw Stop seems like a reasonable stop-gap. I, for one, am glad my air bag only deploys after an accident. It wouldn't do me much good before.Originally Posted by Blaine Harrison
Technically the OSHA dude is correct, but I personally feel it's a bit short sighted.Originally Posted by Blaine Harrison
Obviously today we have the Gr-ripper, push blocks, push sticks, blade guards, splitters and riving knives. Those are all designed to keep your hands from making contact with the blade but as we've all either seen, heard of, or experienced first hand are not all reliable.
Barring a star trek-esque force field around the blade preventing human skin from passing the barrier, .. or more reliably just not using or operating a table saw, I don't think we'll ever see the "Perfect" safety feature.
Love saw stop or hate it, the technology is sound, and is proven to save apendages. At some point in the near future, one will be in my shop.
Originally Posted by Lars Thomas
Lars, I think I saw an article in Psychic Weekly that an ESP equipped saw is in the works. However, the wood you use must be on an astral plane.
Mark Rios
Anything worth taking seriously is worth making fun of.
"All roads lead to a terrestrial planet finder telescope"
We arrive at this moment...by the unswerving punctuality...of chance.
Originally Posted by Blaine Harrison
I think this is the accident that you referred to. The kick-back cause the gentleman to lean into the blade and seriously injured his hand. That is one of my major worries when working on my tablesaw. That is why a saw stop is in my future.
The saw stop would not prevent the kick back but this gentleman would still have his hand intact after this accident.
Originally Posted by William Addison
Come on Mark, You haven't seen the article yet. It's in next month's issue, but as a fellow psychic, you obviously knew that.
I just got off the phone with Sawstop.
I was wondering WHEN the contractor version might be available in Canada. Well,I was surprised to know it's not even available in the US yet. They said they don't even know when it will be available.
That sounds like a long time, and the Cabinet version is out of my price range right now.
Hi Blaine,
In response to a couple of your points, SawStop does not market
their brake technology as a 'perfect safety system'. The manual clearly
states on page #1 that the goal is to minimize any injury.
Also, you mentioned that SawStop would not have prevented a kickback
injury. SawStop just might have prevented kickback with either of two
features:
-the riving knife shadows the blade and does prevent kickback, rising and
lowering with the blade, even on bevels, even on non-through cuts,
while helping the workpiece not move away from the fence, and also
not having the workpiece lifted behind the blade, which is where many
kickbacks get their mulekick power to cause harm
(even a person who normally uses No guard will find it unobtrusive)
-the Sawstop blade guard is of such a clever design, that is often used
by others that admit they used No guard previously (and have told me so)
Furthermore, had a kickback happened, the brake would stop the blade
and retract it below the table surface in between 3-5 milliseconds
thus minimizing injury, depending on user adjustment of the blade to
brake gap. (smaller gap, quicker triggered brake stopping)
Personally, I find it difficult to believe that anyone who ever put in a full
day on a tablesaw, trying to be productive while trying to stay intact,
would not be at least curious about the benefits of this technology.
It is a step of progress. There must be a SawStop, before a JointerStop,
BandsawStop, LawnmowerStop and FoodProcessorStop to become possible and lesson injuries for all. (I have put in thousands of full days in 23 yrs)
I did not post these pics looking for debate. I am comfortable with my
choice, and I am comfortable with the choices others make for themselves.
I posted them because Ben G. asked me to...
In peace,
Walt
There are no shortcuts to anywhere worth going! WCC
Be who you are and say what you feel, because those who mind don't matter and those who matter don't mind - Dr. Seuss
Crohn's takes guts. WCC
Originally Posted by Lars Thomas
My nose is burning from the diet coke that just exited it.............................
Mark Rios
Anything worth taking seriously is worth making fun of.
"All roads lead to a terrestrial planet finder telescope"
We arrive at this moment...by the unswerving punctuality...of chance.
Mark, if you liked that one . . .check out the response to your posting over at http://www.sawmillcreek.org/showthread.php?t=46282
Actually no it wouldn't have, and this is why I hate lawyers. They can turn even the best idea into a fraud riddled mess without even trying. I guess any business is suseptable to it, but lawyers seem to make it an art form.Originally Posted by Barry Beech
Although Mr Gass represented that position before the CPSC, Exhibit B in response to his proposal was a letter by Mr Gass to the editor of Woodshop News, whose engineers disputed the claim that a Saw Stop would prevent accidents in the case of kickbacks and sudden displacement of wood in the same manner as it would the hotdog test.
Mr Gass was forced to acknowledge that, "Certainly, if the user pushes hard toward the blade and the wood is displaced, the hand would slip forward into the blade at a speed sufficient to cause more than a 1/16" nick-perhaps even amputation-even with a Saw Stop"
You will find this paticular misrepresentation on page 60 of part 3 in the PTI response of the CPSC proposal.